トップ > 2010年
2010年
| 公表論文 | 1 | Hiroki Uchiyama, Akinobu Shibata, Masato Sone, YAKICHI HIGO,Effects of CO2 on Ni-P Electroless Plating in an Emulsion of Supercritical CO2 , Journal of The Electrochemical Society, Vol. 157, No. 10, pp. D550-D552, (2010) | |
| 2 | Akinobu Shibata, Homuro Noda, Masato Sone, YAKICHI HIGO, Microstructural development of an electrodeposited Ni layer formed from an additive-free Watts, Thin Solid Films, Vol. 518 , pp. 121-126, (2010) | ||
| 3 | Akinobu Shibata, Takashi Nagoshi, Masato Sone, Shigekazu Morito, YAKICHI HIGO, Evaluation of the block boundary and sub-block boundary strengths of ferrous lath martensite, Materials Science and Engineering A, Vol. 527, pp. 7538-7544,(2010) | ||
| 4 | Masahiro Seshimo, Minoru Ozawa, Masato Sone, Makoto Sakurai, Hideo Kameyama, Hydrogen Permeability and Membrane Durability of Novel Pd/&ganma-alumina Graded Membrane, Journal of Chemical Engineering of Japan, Vol.43, No. 11, pp.932-937, 2010 | ||
| 5 | Mark Chang, Masato Sone, Akinobu Shibata, CHIEMI ISHIYAMA, Yakichi Higo, Bright nickel film deposited by supercritical carbon dioxide emulsion using an additive-free Watt, Electrochimica Acta, Vol. 55, pp. 6469-6475, 2010.8 | ||
| 6 | Masato Sone, Electrochemical NanoplatingUsing Supercritical Carbon Dioxide, Journal of The Surface Finishing Society of Japan, Vol. 61, No. 8, pp. 561-565, 2010.8 | ||
| 7 | CHIEMI ISHIYAMA, Akinobu Shibata, Masato Sone, Yakichi Higo, Effects of Aspect Ratio of Photoresist Patterns on Adhesive Strength between Microsized SU-8 Columns and Silicon Substrate under Bend Loading Condition, Japanese Journal of Applied Physics, Vol. 49, pp. 06GN14-1-06GN14-5, 2010.10 | ||
| 8 | Akinobu Shibata, Yuichiro Ogawa, Masato Sone, Yakichi Higo, Direct Observation of the Change in Microstructure with Deformation in Ferrous Lath Martensite by Using Micro-Sized Specimen, Material Science Forum, vol. 638-642, pp. 3514-3519, Mar. 2010. | ||
| 9 | Byung-Hoon Woo, Masato Sone, Akinobu Shibata, Chiemi Ishiyama, usumu Edo, Masatoshi Tokita, Junji Watanabe, Yakichi Higo, Impregnation of Ni-P Metal into Polymer Substrate via Catalyzation in Sc-CO2 and Electroless Plating in Sc-CO2 Emulsion, Surface & Coating Technology, ELSEVIER, Vol. 204, pp. 1785-1792, Feb. 2010. | ||
| 10 | Akinobu Shibata, Masato Sone, Yakichi Higo, Characterization of deformation-induced structural change of Pd_78 Cu_6 Si_16 metallic glass using a micro -sized cantilever-beam specimen, Scripta Materialia, Vol.62, pp.309-312, 2010.1 | ||
| 11 | Akinobu Shibata, Homuro Noda, Masato Sone, YAKICHI HIGO, Microstructural development of an electrodeposited Ni layer formed from an additive-free Watts bath, Thin Solid Films, Volume 518, Issue 18, 1 July 2010, pp.5153-5158 | ||
| 国際会議 | 12 | Mark Chang, Toshikazu Tasaki, CHIEMI ISHIYAMA, Masato Sone, Void-free nickel pattern electroplated with supercritical carbon dioxide emulsions, MNE 2010, p. P-MEMS-9, 2010.09 | |
| 13 | Masato Sone Metallization for Integrated Circuits via Electroplating in Sc-CO2 Emulsion (Invited Lecture), Advanced Metallization Conference 2010, pp. 62-63, 2010.10 | ||
| 14 | Mark Chang, CHIEMI ISHIYAMA, Masato Sone, Electroplating of Nickel in Supercritical Carbon Dioxide Emulsion Using Additive-Free Watts Bath, 13th Asia Pacific Confederation of Chemical Engineering Congress (APCChE 2010), pp. 160, 2010.10 | ||
| 15 | Nobuyuki Yoshida, Toshikazu Tasaki, Mark Chang, Akinobu Shibata, CHIEMI ISHIYAMA, Masato Sone, Pd-Ni-P metallic glass pattern with controllable microstructure fabricated by electroless alloy plating, MNE 2010, pp. P-MEMS-12, 2010.09 | ||
| 16 | Akinobu Shibata, Takashi Nagoshi, Masato Sone, Shigekazu Morito, YAKICHI HIGO, Characterization of local deformation behavior of martensitic steel using a micro-sized cantilever-beam specimen, 31st Risoe International Symposium on Materials Science, 2010.09 | ||
| 17 | Yuuki Karasawa, Akinobu Shibata, Masato Sone, Strengthening effect of twin boundaries in bcc crystal evaluated through a micro-bending test, 2010 MRS Fall meeting, in press, 2010.12 | ||
| 18 | Takashi Nagoshi, Akinobu Shibata, Masato Sone, Mechanical Behavior on Micro-compression Test in Ultra-low Carbon Steel Produced by High Pressure Torsion, 2010 MRS Fall meeting, in press, 2010.12 | ||
| 19 | CHIEMI ISHIYAMA, Mark Chang, Masato Sone, Effects of supercritical carbon dioxide treatment on bending properties of microsized SU-9 specimens, MNE 2010, p. P-LITH-59, 2010.09 | ||
| 20 | Toshikazu Tasaki, Mark Chang, CHIEMI ISHIYAMA, Masato Sone, Study on delamination mechanism of SU-8 micropillars on a Si-substrate, MNE 2010, p. P-LITH-6, 2010.09 | ||
| 21 | Eri Shinada, Mark Chang, Akinobu Shibata, Masato Sone, Self-annealing at room temperature of Copper electroplating by additive free bath, Advanced Metallization Conference 2010, pp. 94-95, 2010.10 | ||
| 22 | Akinobu Shibata, Takashi Nagoshi, Masato Sone, Shigekazu Morito, YAKICHI HIGO, Micromechanical characterization of boundary strength in martensitic steel, Materials Science & Technology 2010, 2010.10 | ||
| 23 | Masato Sone, Electrodeposition using Supercritical Carbon Dioxide Emulsion (Invited Lecture), 13th Asia Pacific Confederation of Chemical Engineering Congress (APCChE 2010), Vol. 205, 2010.10 | ||
| 国内会議 | 24 | 《他大学講演》曽根正人, 超臨界CO2を使ったナノテクロノジーへの展開, 北陸先端科学技術大学院大学, 2010.6.18 | |
| 25 | 唐沢佑粋, 柴田曉伸, 曽根正人, マイクロサイズ試験片を用いた鉄合金レンズマルテンサイトの局所変形挙動の解明, 鉄鋼協会秋季大会, 北海道大学, 2010.10 | ||
| 26 | 名越貴志, 柴田曉伸, 曽根正人, HPT加工により作成された鉄フェライトの微小角柱圧縮試験における機械的適挙動, 鉄鋼協会秋季大会, 北海道大学, 2010.10 |
- 大岡山キャンパス
- 〒152-8550 東京都目黒区大岡山2-12-1
- すずかけ台キャンパス
- 〒226-8503 神奈川県横浜市緑区長津田町 4259
- 田町キャンパス
- 〒108-0023 東京都港区芝浦3-3-6
Copyright (C) Tokyo Institute of Technology. All rights reserved.